The following error message is reported in PBA-S Action Log during subscription provisioning:
Not enough spare static IP addresses (error# 1)
This error message is reported in case there are no free IP addresses available in corresponding IP pools suitable for the container or Plesk client/Plesk domain provisioning. It is required to extend existing IP pools or create a new one with free IP addresses.
Please note, that IP addresses from IP pools assigned exclusively to some hardware nodes could be provisioned to objects located on selected hardware nodes only. To make IP pool available for all hardware nodes it is possible to click the button 'Edit' on IP pool properties screen and select the option '
All available hardware nodes'.
In case the error message was reported during Plesk domain/Plesk client provisioning please check if there are free IP addresses available in Plesk hosting IP pools available for hardware node where the Plesk client/Plesk domain is located on.
In case the error message was reported during container provisioning please check if there are free IP addresses in Container hosting IP pools available for hardware node running the container.
To review existing IP pool configuration:
- please open
Top > Service Director > IP Manager > IP Pools screen in PBA-S Provider Control Center
- check '
Leases' colomn - IP pools with Leases value equal to Total value are exhausted and either should be extended or new IP pools with similar properties (the same Hosting type and the same or all hardware nodes) should be created.
To create new IP-pool please use instructions from Creating IP Pools article in PBA-S Provider's Guide.