Article ID: 2946, created on Oct 29, 2007, last review on May 8, 2014

  • Applies to:
  • Pro Control Panel Windows

AdditionalInformation

View Knowledge
Knowledge ID 2428
Product : Ensim Pro X for Windows
Version : 10.2.0
Topic : Hotfix

Title
Hotfix 3 : Issue with the password field while adding a new user

Summary
Addresses the issue "Special characters are not allowed in the password field while adding a new user"

Prevention


Details

Ensim® Pro for Windows 10.2.0 Hotfix 3 Release notes

Hotfix information

  • Hotfix no: 3
  • Hotfix date: 24-January-2007
  • Applies to: Ensim Pro X for Windows - 10.2.0

Download: http://download.swsoft.com/ensim/download/pro/windows/10.2.0/hotfix/3/EPW-10.2.0-Hotfix-3.zip
md5sum : 3b2fc427d63965a09336f84e7a5ca2f7

Resolved Issues

This hotfix resolves the following issue.

  • Special characters are not allowed in the password field while adding a new user.

        Issue: While adding a new site user the special characters '~', '!' are not allowed in the password.

        Resolution: Updated the inline Help for password field to exclude '~' & '!' from the allowed characters list.

Prerequisites

Before installing this hotfix, ensure that your Ensim Pro 10.2.0 for Windows system has the following:

  • Ensim Pro for Windows 10.2.0 - hotfix 1

Time requirements and customer impact

It takes a few minutes to apply the hotfix. During this time, new customers cannot be provisioned, and Ensim Pro control panel is unavailable. 

Installing the hotfix

This section explains how to install the hotfix.

    Pre-installation instructions

Before installing the hotfix, you need to disable server applications. This section describes the pre-installation instructions.

  1. Open a command window and run the command iisreset /stop.
  2. Disable the EnsimProvisionEngine service by logging in to server as server administrator and performing the following steps:
        a. Click Start > Programs > Administrative Tools, then click Component Services.
        b. In the left navigation bar, expand Console Root > Component Services > Computers > My Computer >
             COM+ Applications.
        c. Right-click EnsimProvisionEngine, then select Shut down.

The pre-installation procedure is complete.

    Installation instructions

        After performing the steps in the pre-installation section, complete the following steps to install the hotfix.

  1. Unzip the hotfix zip file to a temporary directory.
  2. Change to the directory <install_dir>\cp\admin\bin where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then go to C:\Program Files\Ensim\WEBppliance\cp\admin\bin  directory.
  3. Back up the existing cp.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  4. Copy the new cp.dll from the temporary directory to the current directory.
  5. Back up the existing Ensim.CP.Lib.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  6. Copy the new Ensim.CP.Lib.dll  from the temporary directory to the current directory.
  7. Back up the existing EnsimLib.UI.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  8. Copy the new EnsimLib.UI.dll  from the temporary directory to the current directory.
  9. Change to the directory <install_dir>\cp\admin\siteadmin\serviceComponents\filemanager\FMWeb\bin where <install_dir> refers to the path where Ensim Pro is installed. 
  10. Copy the new EnsimLib.UI.dll from the temporary directory to the current directory.
  11. Change to the directory <install_dir>\cp\admin\resources\en-US where <install_dir> refers to the path where Ensim Pro is installed.
  12. Back up the existing platform.strings.po file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  13. Copy the new platform.strings.po from the temporary directory to the current directory.
  14. Change to the directory <install_dir>\cp\admin\resources where <install_dir> refers to the path where Ensim Pro is installed.
  15. Run the following command from command prompt, reglangpack.exe -s <EPW Server IP>

    Post-installation instructions

After installing the hotfix as described in the preceding section, perform the following step to complete the hotfix installation.  

 

1.      Open a command window and run the command iisreset /start.

The hotfix installation is complete.

Removing the hotfix

    You can remove (or roll back) the installed hotfix by restoring the backed up DLL files    

        To roll back the hotfix installation:

  1. Login to the server as administrator.
  2. Open a command window and run the command iisreset /stop.
  3. Stop the EnsimProvisionEngine COM+ component:
        a. Click Start > Programs > Administrative Tools, then click Component Services.
        b. In the left navigation bar, expand Console Root > Component Services > Computers > My Computer >
             COM+ Applications.
        c. Right-click EnsimProvisionEngine, then select Shut down.
  4. Restore the cp.dll file from the backup location to the directory <install_dir>\cp\admin\bin where <install_dir> refers to the path where Ensim Pro is installed.
  5. Restore the Ensim.CP.Lib.dll file from the backup location to the directory <install_dir>\cp\admin\bin where <install_dir> refers to the path where Ensim Pro is installed.
  6. Restore the EnsimLib.UI.dll file from the backup location to the directory <install_dir>\cp\admin\bin where <install_dir> refers to the path where Ensim Pro is installed.
  7. Restore the EnsimLib.UI.dll file from the backup location to the directory <install_dir>\cp\admin\siteadmin\serviceComponents\filemanager\FMWeb\bin where <install_dir> refers to the path where Ensim Pro is installed.
  8. Restore the platform.strings.po file from the backup location to the directory <install_dir>\cp\admin\resources\en-US where <install_dir> refers to the path where Ensim Pro is installed.
  9. Change to the directory <install_dir>\cp\admin\resources where <install_dir> refers to the path where Ensim Pro is installed.
  10. Run the following command from command prompt, reglangpack.exe -s <EPW Server IP>
  11. Open a command window and run the command iisreset /start.

The hotfix rollback is complete.


Attachments


Related Knowledge

Related Links
 
Last ModifiedUsageSatisfiedLast Used
1/24/2007 3:37:20 AM20 10/12/2007 5:19:06 AM

8e19bcddff0cc55cafe80c841132ca59 3ccb419cf98083f3bb45808fba8dbc7c 6311ae17c1ee52b36e68aaf4ad066387

Email subscription for changes to this article
Save as PDF