Article ID: 2877, created on Oct 29, 2007, last review on Apr 25, 2014

  • Applies to:
  • Pro Control Panel Windows

AdditionalInformation

View Knowledge
Knowledge ID 2299
Product : EnsimPro for Windows 2003
Version : 4.0.1
Topic : Hotfix

Title
Hotfix 17 : Limitation on ACL lists for C:\inetpub\ftproot

Summary
Addresses the issue "Limitation on ACL lists for C:\inetpub\ftproot"

Prevention


Details

Ensim® Pro for Windows 4.0.1 Hotfix 17 Release notes

Hotfix information

  • Service:Ensim Pro for Windows - 4.0.1
  • Hotfix no:17
  • Hotfix date:June 15, 2006

Download: http://download.swsoft.com/ensim/download/pro/windows/4.0.1/hotfix/hotfix17/WWP-4.0.1-Hotfix-17.zip
md5sum : a0eb79e3a4752ee9c92d47b8e1ca795d

Resolved Issues

This hotfix resolves the following issue.

  • Limitation on ACL lists for C:\inetpub\ftproot

Prerequisites

Before installing this hotfix, ensure that your Ensim Pro 4.0.1 for Windows system has the following:

  • Ensim Pro for Windows 4.0.1 - hotfix 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

Time requirements and customer impact

It takes a few minutes to apply the hotfix. During this time, new customers cannot be provisioned, and Ensim Pro control panel is unavailable. 

Installing the hotfix

This section explains how to install the hotfix.

Pre-installation instructions

Before installing the hotfix, you need to disable server applications. This section describes the pre-installation instructions.

  1. Ensure that you have installed all hotfixes mentioned in the prerequisites section unless they are marked as optional.
  2. Open a command window and run the command iisreset /stop.
  3. Disable the EnsimProvisionEngine service by logging in to server as server administrator and performing the following steps:
        a. Click Start > Programs > Administrative Tools > then click Component Services.
        b. In the left navigation bar, expand Console Root > Component Services > Computers > My Computer > COM+ Applications
        c. Right-click EnsimProvisionEngine, then select Shut down

The pre-installation procedure is complete.

Installation instructions

After performing the steps in the pre-installation section, complete the following steps to install the hotfix.

  1. Unzip the hotfix zip file to a temporary directory.
  2. Change to the directory <install_dir>\pe\ProvEngine where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\pe\ProvEngine directory.
  3. Back up the existing Ensim.ProvEngine.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  4. Copy the new Ensim.ProvEngine.dll from the temporary directory to the current directory.
  5. Change to the directory <install_dir>\cp\admin\bin\serviceComponents\msftp where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\cp\admin\bin\serviceComponents\msftp  directory.
  6. Back up the existing msftpsvcBackend.dll and msftpsvcBackendServer.dll files to a location other than the existing directory.    Important: Do not rename the file and keep it in the current directory.
  7. Copy the new msftpsvcBackend.dll and msftpsvcBackendServer.dll from the temporary directory to the current directory.

Post-installation instructions

After installing the hotfix as described in the preceding section, perform the following steps to complete the hotfix installation.

1.      Open a command window and run the command iisreset /start.

The hotfix installation is complete.

Removing the hotfix

You can remove (or roll back) the installed hotfix by restoring the backed up DLL files    

To roll back the hotfix installation:

  1. Login to the server as administrator.
  2. Open a command window and run the command iisreset /stop.
  3. Stop the EnsimProvisionEngine COM+ component. Open Start > Programs > Administrative Tools > Component Services
    Navigate to : Computers > My Computer > COM+ Applications > EnsimProvisionEngine. Right Click > Shut Down
  4. Restore the Ensim.ProvEngine.dll file from the backup location to the directory <install_dir>\pe\ProvEngine where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\pe\ProvEngine  directory.
  5. Restore the msftpsvcBackend.dll and msftpsvcBackendServer.dll files from the backup location to the directory <install_dir>\cp\admin\bin\serviceComponents\msftp where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\cp\admin\bin\serviceComponents\msftp directory.
  6. Open a command window and run the command iisreset /start.

The hotfix rollback is complete.


Attachments


Related Knowledge

Related Links
 
Last ModifiedUsageSatisfiedLast Used
6/28/2006 2:43:57 AM11 10/11/2007 5:21:35 AM

8e19bcddff0cc55cafe80c841132ca59 3ccb419cf98083f3bb45808fba8dbc7c 6311ae17c1ee52b36e68aaf4ad066387

Email subscription for changes to this article
Save as PDF