Article ID: 2782, created on Oct 29, 2007, last review on May 9, 2014

  • Applies to:
  • Pro Control Panel Windows

AdditionalInformation

View Knowledge
Knowledge ID 2154
Product : EnsimPro for Windows 2003
Version : 4.0.1
Topic : Hotfix

Title
Hotfix 12 : Customized style sheet does not apply to File Manager

Summary
Addresses the issue "Customized style sheet does not apply to File Manager and some other GUI pages"

Prevention


Details

Ensim® Pro for Windows 4.0.1 Hotfix 12 Release notes

Hotfix information

  • Service: Ensim Pro for Windows - 4.0.1
  • Hotfix no:12
  • Hotfix date:21-November-2005

Download: http://download.swsoft.com/ensim/download/pro/windows/4.0.1/hotfix/hotfix12/WWP-4.0.1-Hotfix-12.zip
md5sum : 536d5274903c3d501410bc46b712bcb5

Resolved Issues

This hotfix resolves the following issue.

  • Customized style sheet does not apply to File Manager and some other GUI pages

Note: After applying this hotfix, the file manager interface will look slightly different since the control panel style sheet will apply to it.

Prerequisites

Before installing this hotfix, ensure that your Ensim Pro 4.0.1 for Windows system has the following:

  • Ensim Pro for Windows 4.0.1 - hotfix 1, 2, 3, 4, 6, 7, 8, 9, 10, 11

Time requirements and customer impact

It takes a few minutes to apply the hotfix. During this time, new customers cannot be provisioned, and Ensim Pro control panel is unavailable. 

Installing the hotfix

This section explains how to install the hotfix.

Pre-installation instructions

Before installing the hotfix, you need to disable server applications. This section describes the pre-installation instructions.

  1. Ensure that you have installed all hotfixes mentioned in the prerequisites section unless they are marked as optional.
  2. Open a command window and run the command iisreset /stop.
  3. Disable the EnsimProvisionEngine service by logging in to server as server administrator and performing the following steps:
        a. Click Start > Programs > Administrative Tools > then click Component Services.
        b. In the left navigation bar, expand Console Root > Component Services > Computers > My Computer > COM+ Applications
        c. Right-click EnsimProvisionEngine, then select Shut down

The pre-installation procedure is complete.

Installation instructions

        After performing the steps in the pre-installation section, complete the following steps to install the hotfix.

  1. Unzip the hotfix zip file to a temporary directory.
  2. Change to the directory <install_dir>\cp\admin\bin where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\cp\admin\bin directory.
  3. Back up the existing cp.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  4. Copy the new cp.dll from the temporary directory to the current directory.
  5. Change to the directory <install_dir>\cp\admin\siteadmin\serviceComponents\filemanager\FMWeb\bin
  6. Back up the existing FMWeb.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  7. Copy the new FMWeb.dll from the temporary directory to the current directory.
  8. Change to the directory <install_dir>\cp\admin\bin\serviceComponents\filemanager
  9. Back up the existing FileManagerFrontend.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory.
  10. Copy the new FileManagerFrontend.dll file from the temporary directory to the current directory.
  11. Change to the directory <install_dir>\cp\admin\siteadmin\serviceComponents\filemanager\FMWeb
  12. Back up the existing Delete.ascx, FileContent.ascx, FileUpload.ascx, FolderOperations.ascx, Folders.ascx, GlobalStatusBar.ascx, GlobalToolBar.ascx, NewFile.ascx, Permission.ascx, Rename.ascx, FileManager.aspx  file to a location other than the existing directory. 
    Important: Do not rename the file and keep it in the current directory.
  13. Copy the new Delete.ascx, FileContent.ascx, FileUpload.ascx, FolderOperations.ascx, Folders.ascx, GlobalStatusBar.ascx, GlobalToolBar.ascx, NewFile.ascx, Permission.ascx, Rename.ascx, FileManager.aspx from the temporary directory to the current directory.
  14. Change to the directory <install_dir>\cp\admin\bin\serviceComponents\w3svc
  15. Back up the existing W3svcFrontend.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory. 
  16. Copy the new W3svcFrontend.dll from the temporary directory to the current directory.
  17. Change to the directory <install_dir>\cp\admin\bin\serviceComponents\msftp
  18. Back up the existing msftpsvcFrontend.dll file to a location other than the existing directory.
    Important: Do not rename the file and keep it in the current directory. 
  19. Copy the new msftpsvcFrontend.dll from the temporary directory to the current directory.

Post-installation instructions

After installing the hotfix as described in the preceding section, perform the following steps to complete the hotfix installation.

1.      Open a command window and run the command iisreset /start.

The hotfix installation is complete.

Removing the hotfix

You can remove (or roll back) the installed hotfix by restoring the backed up DLL files    

To roll back the hotfix installation:

  1. Login to the server as administrator.
  2. Open a command window and run the command iisreset /stop.
  3. Stop the EnsimProvisionEngine COM+ component. Open Start > Programs > Administrative Tools > Component Services
    Navigate to : Computers > My Computer > COM+ Applications > EnsimProvisionEngine. Right Click > Shut Down
  4. Restore the cp.dll file from the backup location to the directory <install_dir>\cp\admin\bin where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\cp\admin\bin directory.
  5. Restore the FMWeb.dll file from the backup location to the directory <install_dir>\cp\admin\siteadmin\serviceComponents\filemanager\FMWeb\bin.
  6. Restore the FileManagerFrontend.dll file from the backup location to the directory <install_dir>\cp\admin\bin\serviceComponents\filemanager
  7. Restore the Delete.ascx, FileContent.ascx, FileUpload.ascx, FolderOperations.ascx, Folders.ascx, GlobalStatusBar.ascx, GlobalToolBar.ascx, NewFile.ascx, Permission.ascx, Rename.ascx, FileManager.aspx from backup location to the directory <install_dir>\cp\admin\siteadmin\serviceComponents\filemanager\FMWeb.
  8. Restore the W3svcFrontend.dll from the backup location to the directory <install_dir>\cp\admin\bin\serviceComponents\w3svc.
  9. Restore the msftpsvcFrontend.dll from the backup location to the directory <install_dir>\cp\admin\bin\serviceComponents\msftp.
  10. Open a command window and run the command iisreset /start.

The hotfix rollback is complete.


Attachments


Related Knowledge

Related Links
 
Last ModifiedUsageSatisfiedLast Used
11/21/2005 5:53:36 AM356710/11/2007 5:14:51 AM

8e19bcddff0cc55cafe80c841132ca59 3ccb419cf98083f3bb45808fba8dbc7c 6311ae17c1ee52b36e68aaf4ad066387

Email subscription for changes to this article
Save as PDF