Article ID: 126761, created on Aug 31, 2015, last review on Aug 31, 2015

  • Applies to:
  • Operations Automation 5.4

Symptoms

it is not possible to remove a hardware node from OA. The following error is shown:

Host #123 is busy by services that are controlled by SC #40. 

Cause

Some services are still present on this hardware node.

Resolution

  1. Go to Infrastructure > Service Controllers and check what is SC #40 to understand what services cause the issue
  2. unprovision services from this hardware node (most likely it will be necessary to cancel/remove subscription(s) to do it)
  3. try to remove the hardware node again

Search Words

Error Host #41 is busy by services that are controlled by SC #50.

remove hardware node

ac82ce33439a9c1feec4ff4f2f638899 caea8340e2d186a540518d08602aa065 e12cea1d47a3125d335d68e6d4e15e07 5356b422f65bdad1c3e9edca5d74a1ae 2554725ed606193dd9bbce21365bed4e

Email subscription for changes to this article
Save as PDF