Article ID: 112368, created on Sep 23, 2011, last review on May 2, 2014

  • Applies to:
  • Operations Automation 5.2

Symptoms

Parallels Virtuozzo Containers (PVC) 4.7 for Linux fails to be registered in POA with the following error:

Task ID    645096
Task name    register HW Node with Agent IP 10.55.65.170
Task description    Task that register HW Node with ip 10.55.65.170
Queue status    Failed    
Start not earlier than    Sep-23-2011 12:48
Method name    taskRegisterHWNode on SCREF:VPSTasks:0
Last execution output    IP address 'fe80::21c:42ff:fed2:8803' is not valid.


Cause

The VPS Hardware Node PVC 4.7 for Linux cannot be registered if IPv6 support is enabled on the network interface.

Resolution

1. Disable IPv6 support on all network interfaces on the VPS Hardware Node with the following command:# sysctl -w net.ipv6.conf.all.disable_ipv6=1
2. Execute the HW Node registration task.

3. Enable IPv6 support on network interfaces:# sysctl -w net.ipv6.conf.all.disable_ipv6=0
This issue is fixed in POA 5.3.

c2898cda1192c88ccc616ade5f670bd6 5356b422f65bdad1c3e9edca5d74a1ae 2554725ed606193dd9bbce21365bed4e caea8340e2d186a540518d08602aa065 e12cea1d47a3125d335d68e6d4e15e07

Email subscription for changes to this article
Save as PDF